Statutory Rule 2002 No. 375

Motor Vehicles (Construction and Use) (Amendment No. 4) Regulations (Northern Ireland) 2002

---

© Crown Copyright 2002

Statutory Rules of Northern Ireland printed from this website are printed under the superintendence and authority of the Controller of HMSO being the Government Printer for Northern Ireland.

The legislation contained on this web site is subject to Crown Copyright protection. It may be reproduced free of charge provided that it is reproduced accurately and that the source and copyright status of the material is made evident to users.

It should be noted that the right to reproduce the text of Statutory Rules of Northern Ireland does not extend to the Government Printer for Northern Ireland imprints which should be removed from any copies of the Statutory Rule which are issued or made available to the public. This includes reproduction of the Statutory Rule on the Internet and on intranet sites. The Royal Arms may be reproduced only where they are an integral part of the original document.

The text of this Internet version of the Statutory Rule which is published by the Government Printer for Northern Ireland has been prepared to reflect the text as it was Made. A print version is also available and is published by The Stationery Office Limited as the Motor Vehicles (Construction and Use) (Amendment No. 4) Regulations (Northern Ireland) 2002, ISBN 0 33794425 3. The print version may be purchased by clicking here. Braille copies of this Statutory Rule can also be purchased at the same price as the print edition by contacting TSO Customer Services on 0870 600 5522 or e-mail:customer.services@tso.co.uk.

Further information about the publication of legislation on this website can be found by referring to the Frequently Asked Questions.

To ensure fast access over slow connections, large documents have been segmented into "chunks". Where you see a "continue" button at the bottom of the page of text, this indicates that there is another chunk of text available.

" "off-road vehicle" means an off-road vehicle as defined in Annex II to Council Directive 92/53/EEC of 18th June 1992[3]";

(b) in the definition of "overall length", in sub-paragraph (ii), for "and 19" there shall be substituted "and 18";

(c) in the definition of "plated weight", for the words "regulation 69(2)" there shall be substituted "regulation 79(2)"; and

(d) in the definition of "registered", for paragraphs (e) and (f) there shall be substituted-


" (e) the 1971 Act;

(f) the 1972 Act; or

(g) the 1994 Act; and".

    (3) In paragraph (4)-

(a) in sub-paragraph (a), for the words "or the 1972 Act," there shall be substituted ", the 1972 Act or the 1994 Act ,"; and

(b) in sub-paragraph (b)(i), for the words "section 16 of the 1972 Act" there shall be substituted "section 11 of the 1994 Act".

    (4) In paragraph (10), for the words "regulations 59, 86, 87, 89" there shall be substituted "regulations 60, 88, 89, 91".

Amendment to regulation 6 (length)
     3. In paragraph (2)(a) of regulation 6 of the principal Regulations, for the words "paragraph 7 of Schedule 3 to the 1972 Act" there shall be substituted "section 62 of the 1994 Act".

Turning circle  -  articulated vehicles other than those incorporating a car transporter
     4. For regulation 16 (turning circle  -  articulated vehicles other than those incorporating a car transporter) of the principal Regulations there shall be substituted-

" Turning circle  -  articulated vehicles other than those incorporating a car transporter
     16.  - (1) Every vehicle to which this regulation applies shall be able to move on either lock so that, both with and without all its wheels in contact with the surface of the road and disregarding the things set out in paragraphs (a) to (m) in the definition of "overall width" and in paragraph (i)(a) to (o) in the definition of "overall length" in regulation 2(1), no part of it projects outside the area contained between concentric circles with radii of 12.5m and 5.3m.

    (2) This regulation applies to all articulated vehicles except the following-


(a) an articulated vehicle, the semi-trailer of which-


(i) was manufactured before 1st April 1990 and has an overall length that does not exceed the overall length it had on that date,

(ii) is a car transporter,

(iii) is a low loader,

(iv) is a stepframe low loader, or

(v) is constructed and normally used for the conveyance of indivisible loads of exceptional length;



(b) an articulated vehicle having an overall length not exceeding 15.5m and of which the drawing vehicle was first used before 20th April 1999 or the trailer was first used before that date; or

(c) an articulated vehicle when an axle of the trailer is raised to aid traction.



    (3) In relation to a vehicle manufactured before 20th April 1999, paragraph (1) shall have effect as if the words "both with and without all its wheels in contact with the surface of the road and" were omitted.

    (4) An articulated vehicle shall be taken to comply with paragraph (1) if the semi-trailer comprised in it is, by virtue of paragraph 7.6.1.2 of Annex I to Community Directive 97/27/EC[4], deemed to comply with paragraph 7.6.1 of that Annex.".

Amendment to regulation 20 (braking systems of certain vehicles first used on or after 1st April 1983)
     5. In paragraph (7)(d) of regulation 20 of the principal Regulations, for "the Motor Vehicles (Type Approval and Approval Marks) (Fees) Regulations (Northern Ireland) 1990" there shall be substituted "the Motor Vehicles (Type Approval and Approval Marks) (Fees) Regulations (Northern Ireland) 1992".

Amendment to regulation 43 (speed limiters fitted to goods vehicles)
     6. In paragraph (6)(f) of regulation 43 of the principal Regulations, for the words "section 5 and Schedule 2 of the Vehicles (Excise) Act 1994" there shall be substituted "section 5 of and Schedule 2 to the 1994 Act".

Amendment to regulation 44 (audible warning instruments)
     7.  - (1) Regulation 44 of the principal Regulations shall be amended in accordance with paragraphs (2) and (3).

    (2) In paragraph (5)(e), after the word "Personal" there shall be inserted the word "Social".

    (3) In paragraph (10), for the words "regulation 116" there shall be substituted "regulation 114".

Amendment to regulation 60 (sideguards)
     8. In paragraph (1)(c) of regulation 60 of the principal Regulations, for "216,000 kg" there shall be substituted "26,000 kg".

Amendments to regulation 74 (emission of smoke, vapour, gases, oily substances etc.)
     9.  - (1) Regulation 74[5] of the principal Regulations shall be amended in accordance with paragraphs (2) to (5).

    (2) After paragraph (2) there shall be inserted the following paragraph-

    " (2A) Paragraphs (3), (4), (6), (8), (9)(b), (9)(c), (10), (11), (12), (13), (14) and (24) shall not apply to motor vehicles first used on or after 28th February 2003.".

    (3) In paragraph (7)(a), after the words "agricultural vehicle" there shall be inserted "first used before 28th February 2003.".

    (4) In paragraph (26), after the words "In Table II" there shall be inserted "and paragraphs (20) and (22)".

    (5) In Table II-

(a) in item 7, in column (3), for "1st April 1999" there shall be substituted "1st April 1991";

(b) in item 11, after the entry in column 4(a) there shall be inserted "or ECE Regulation 83.02";

(c) in item 12, after the entry in column (4)(a) there shall be inserted "or ECE Regulation 83.03"; and

(d) in items 13 and 14, after the entry in column (4)(a) there shall be inserted "or ECE Regulation 83.04".

Emission of smoke, vapour, gases, oily substances etc.  -  further requirements for certain motor vehicles first used on or after 28th February 2003
     10. After regulation 74 (emission of smoke, vapour, gases, oily substances etc.) of the principal Regulations there shall be inserted the following-

" Emission of smoke, vapour, gases, oily substances etc  -  further requirements for certain motor vehicles first used on or after 28th February 2003
     74A.  - (1) This regulation shall apply to motor vehicles first used on or after 28th February 2003.

    (2) Subject to paragraphs (5) to (7) and Schedule 8, a motor vehicle in any category shall comply with such design, construction and equipment requirements and such limit values as may be specified for a motor vehicle of that category and weight by any Community Directive specified in item 1 or 2 of the Table and from such date as is specified by that Community Directive.

    (3) Subject to paragraphs (4) to (7) and Schedule 8, no person shall use, or cause or permit to be used, on a road a motor vehicle if the motor vehicle does not comply with such limit values as may apply to it by virtue of any Community Directive specified in item 1 or 2 of the Table, and from such date as is specified by that Community Directive, unless the following conditions are satisfied with respect to it-


(a) the failure to meet the limit values does not result from an alteration to the propulsion unit or exhaust system of the motor vehicle;

(b) neither would those limit values be met nor the emissions of gaseous and particulate pollutants and smoke and evaporative emissions be materially reduced if maintenance work of a kind which would fall within the scope of a normal periodic service of the vehicle were to be carried out on the motor vehicle; and

(c) the failure to meet those limit values does not result from any device designed to control the emission of gaseous and particulate pollutants and smoke and evaporative emissions which is fitted to the motor vehicle being other than in good and efficient working order.



    (4) Where-



(a) a motor vehicle is fitted with a device of the kind referred to in sub-paragraph (c) of paragraph (3);

(b) the motor vehicle does not comply with the limit values applying to it which are referred to in that paragraph; and

(c) the conditions specified in sub-paragraphs (a) and (b) of paragraph (3) are satisfied in respect of the motor vehicle,



nothing in paragraph (3) shall prevent the motor vehicle being driven to a place where the device is to be repaired or replaced.

    (5) Subject to paragraph (6), if the Department has exempted any motor vehicle produced in a small series from one or more of the provisions of a Community Directive specified in item 1 of the Table in accordance with the procedure in Article 8(2)(a) of the Framework Directive then paragraphs (2) and (3) shall not apply to that motor vehicle insofar as it has been so exempted.

    (6) If any motor vehicle has been exempted from one or more of the provisions of a Community Directive specified in item 1 of the Table in accordance with paragraph (5), then in the Table as it applies to that motor vehicle there shall be deemed to be substituted, for the reference to Community Directive 96/69/EC or ECE Regulation 83.04, Community Directive 98/69/EC and 1999/102/EC-



(a) in the case of passenger cars as defined in regulation 74(25), a reference to Community Directive 94/12/EC or ECE Regulation 83.03; and

(b) in the case of other motor vehicles of category M, a reference to Community Directive 93/59/EEC or ECE Regulation 83.02,



and in any such case paragraphs (2) and (3) shall apply to the motor vehicle as if they referred to the substituted Community Directives or ECE Regulations.

    (7) If any motor vehicle has been exempted from one or more of the provisions of a Community Directive specified in item 1 or 2 of the Table in accordance with Schedule 8, then in the Table as it applies to that motor vehicle there shall be deemed to be substituted-



(a) for the reference to Community Directive 98/69/EC and 1999/102/EC, a reference to Community Directive 96/69/EC or ECE Regulation 83.04; and

(b) for the reference to Community Directive 1999/96/EC, a reference to Community Directive 91/542/EC or ECE Regulation 49.02,



and in any such case paragraphs (2) and (3) shall apply to the motor vehicle as if they referred to the substituted Community Directives or ECE Regulations.

    (8) In this regulation-



(a) "category" means a category for the purpose of Annex II to the Framework Directive;

(b) "date as is specified" means the date specified by the relevant Community Directive as that from which Member States are required to prohibit the registration or the entry into service of motor vehicles which do not comply with the limit values specified by the relevant Community Directive or, in the case of emission control and monitoring systems and devices, the date specified by the relevant Community Directive for the fitting of such equipment;

(c) "limit values" means the permitted amounts of gaseous and particulate pollutants and smoke and evaporative emissions; and

(d) "small series" means the motor vehicles within a family of types as defined in Annex XII to the Framework Directive which are registered or enter into service in a period of twelve months beginning on the 1st January in any year where the total number of motor vehicles does not exceed the small series limits specified in that Annex.


TABLE (regulation 74A)


(1)	(2)	(3)
Item	Community Directive or ECE Regulation	Amending Community Directive or ECE Regulation
1.	70/220/EEC	96/69/EC or ECE Regulation 83.04 98/69/EC 1999/102/EC
2.	88/77/EEC or ECE Regulation 49.01	91/542/EEC or ECE Regulation 49.02 1999/96/EC".

Amendments to regulation 79 (plates for goods vehicles and buses)
     11.  - (1) Regulation 79 of the principal Regulations shall be amended in accordance with paragraphs (2) and (3).

    (2) In paragraph (5), for the words "Schedule 7" there shall be substituted "Schedule 11".

    (3) In paragraph (6), for the words "Motor Vehicles (Authorised Weights) Regulations (Northern Ireland) 1999" there shall be substituted "Motor Vehicles (Authorised Weight) Regulations (Northern Ireland) 1999".

Amendment to regulation 88 (maximum permitted laden weight of a vehicle and trailer, other than an articulated vehicle)
     12. In paragraph (3) of regulation 88 of the principal Regulations, for the words "regulation 85(5), (6) and (7)" there shall be substituted "regulation 87(5), (6) and (7)".

Amendments to Schedule 1
     13.  - (1) Table I in Schedule 1 to the principal Regulations shall be amended in accordance with paragraphs (2) and (3).

    (2) After item 88A[6] there shall be inserted the following item-

"88B.

96/69

08.10.96

L282, 1.11.96, p. 64

Measures to be taken against air pollution by emissions from motor vehicles

70/220 as amended by 74/290, 77/102, 78/665, 83/351, 88/76, 88/436, 89/491, 91/441, 93/59, 94/12 and 96/44

".

    (3) After item 91 there shall be inserted the following items-

"92.	98/69	13.10.98	L350, 28.12.98, p. 1	Measures to be taken against air pollution by emissions from motor vehicles	70/220 as amended by 74/290, 77/102, 78/665, 83/351, 88/76, 88/436, 89/491, 91/441, 93/59, 94/12, 96/44 and 96/69
93.	1999/96	13.12.99	L44, 16.2.2000, p. 1	Measures to be taken against the emission of gaseous and particulate pollutants from compression ignition engines for use in vehicles and the emission of gaseous pollutants from positive ignition engines fuelled with natural gas or liquefied petroleum gas for use in vehicles	88/77 as amended by 91/542 and 96/1
94.	1999/ 102	15.12.99	L334, 28.12.99, p. 43	Measures to be taken taken against air pollution by emissions from motor vehicles	70/220 as amended by 74/290, 77/102, 78/665, 83/351, 88/76, 88/436, 89/491, 91/441, 93/59, 94/12, 96/44, 96/69 and 98/69	".

Amendment to Schedule 1A
     14.  - (1) Part II of Schedule 1A[7] to the principal Regulations shall be amended in accordance with paragraphs (2) and (3).

    (2) In paragraph 9(1), for the words "regulation 9(2) of the Approval Regulations" there shall be substituted "regulation 8(2) of the Approval Regulations".

    (3) After paragraph 10 there shall be inserted the following-

" Modification to regulation 74A (emissions)
     10A.  - (1) Regulation 74A shall not apply to a vehicle in respect of which an approval certificate has been issued, if it complies with or is exempt from the approval requirements relating to exhaust or smoke emissions.

    (2) Regulation 74A shall have effect with the following modifications in relation to a vehicle in respect of which there has been issued an approval certificate containing the letter "A" pursuant to regulation 8(2) of the Approval Regulations.

    (3) For the purposes of paragraphs (2) and (3) of regulation 74A, the date as is specified (as defined in regulation 74A) shall be regarded as being the 1st January immediately preceeding the date of manufacture of the engine by which the vehicle is propelled; provided that the date as is specified shall not in any circumstances be regarded as being later than the date on which the motor vehicle would otherwise have been regarded as being first used.".

Amendments to Schedule 8
     15.  - (1) Schedule 8 to the principal Regulations shall be amended in accordance with paragraphs (2) to (8).

    (2) In the titles in Part I, for the words "regulations 67 and 74" there shall be substituted the words "regulations 67, 74 and 74A".

    (3) In paragraph 1, after sub-paragraph (4), there shall be inserted the following sub-paragraph-

    " (4A) Paragraphs (2) and (3) of regulation 74A and an item numbered 1 or 2 in the Table in that regulation shall not apply to-


(a) a type approval end of series vehicle;

(b) a non-type approval end of series vehicle; or

(c) a late entry into service vehicle,



if it is first used before the first anniversary of the date as is specified (as defined in regulation 74A) by the relevant Community Directive in item 1 or 2 in the Table in regulation 74A."

    (4) In paragraph 2, for sub-paragraph (2), there shall be substituted the following sub-paragraph-

    " (2) For the purposes of paragraph (1), a vehicle is a type approval end of series vehicle, in relation to item 2 in the Table in regulation 67 or an item numbered 10 or higher (other than item 11) in Table II in regulation 74 or an item numbered 1 or 2 in the Table in regulation 74A if, by virtue of Schedule 1C to the Northern Ireland Regulations (which Schedule in certain circumstances defers the date on which certain requirements relating to exhaust emissions, noise and silencers cease to apply), the type approval requirements that applied to the vehicle on the date specified in column 3 of the item or, in relation to item 1 or 2 of the Table in regulation 74A, on the date as is specified (as defined in regulation 74A) by the relevant Community Directive are the same as the type approval requirements that applied to the vehicle immediately before the date so specified in that column of that item or, in relation to item 1 or 2 of regulation 74A, the date as is specified by the relevant Community Directive.".

    (5) In paragraph 7(2)(e)(ii), after the words "on the date specified in column 3 in the item" there shall be inserted "or, in relation to item 1 or 2 of the Table in regulation 74A, on the date as is specified (as defined in regulation 74A) by the relevant Community Directive".

    (6) In paragraph 9(2)(c), after the words "before the date specified in column 3 of that item" there shall be inserted "or, in relation to item 1 or 2 of the Table in regulation 74A, before the date as is specified (as defined in regulation 74A) by the relevant Community Directive".

    (7) In paragraph 11, after sub-paragraph (b), there shall be inserted the following-

" ; and
(c) in relation to an item numbered 1 or 2 in the Table in regulation 74A is the two year period ending immediately before the date as is specified (as defined in regulation 74A) by the relevant Community Directive in the Table.".

    (8) In paragraph 12(b), after the words "before the date specified in column 3 of the item" there shall be inserted "or, in relation to item 1 or 2 of the Table in regulation 74A, before the date specified (as defined in regulation 74A) by the relevant Community Directive".



Sealed with the Official Seal of the Department of the Environment on


4th December 2002.

L.S.

Wesley Shannon
A senior officer of the Department of the Environment

[2] S.R. 1999 No. 454; relevant amending Regulations are S.R. 2001 No. 28 and S.R. 2001 No. 173back

[3] O.J. No. L225, 10.8.92, p. 1back

[4] O.J. No. L233, 25.8.97, p. 1. "Community Directive" is defined by regulation 2(2) of, and Schedule 1 to, the Motor Vehicles (Construction and Use) Regulations (Northern Ireland) 1999back

[5] Regulation 74 was amended by S.R. 2001 No. 173, regulation 3back

[6] Item 88A was inserted by S.R. 2001 No. 28, regulation 7(3)back

[7] Schedule 1A was inserted by S.R. 2001 No. 173, regulation 4 and Scheduleback