Office of Public Sector Information

Office of Public Sector Information

Advanced Search

Main menu and contents

Supplementary menus and contents

Related Pages
Feeds

SCHEDULE 1 continued    PART 2

Page 5 of 15

Previous Next

First page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Last page

PART 2 Margins of tolerance for benzene and nitrogen dioxide

Start of period during which the margin applies End of period during which the margin applies Benzene Nitrogen dioxide (hourly limit value for the protection of human health) Nitrogen dioxide (annual limit value for the protection of human health)
Coming into force of these Regulations 31 December 2007 3 μg/m3 30 μg/m3 6 μg/m3
1 January 2008 31 December 2008 2 μg/m3 20 μg/m3 4 μg/m3
1 January 2009 31 December 2009 1 μg/m3 10 μg/m3 2 μg/m3

PART 3 Target values for Group B pollutants

1.  The target values in the table below in each case relate to the total content of the relevant pollutant in the PM10 fraction averaged over one calendar year.

2.  The attainment date for each of these target values is 31 December 2012.

Pollutant Target value
Arsenic 6 ng/m3
Benzo(a)pyrene 1 ng/m3
Cadmium 5 ng/m3
Nickel 20 ng/m3

PART 4 Target values and long-term objectives for ozone

3.  In this Part—

(a) all values must be expressed in μg/m3;

(b) the volume must be standardised at the following conditions of temperature and pressure: 293K and 101.3kPa;

(c) the time must be specified in Central European Time;

(d) “AOT40” (expressed in (μg/m3) hours) means the sum of the difference between hourly concentrations greater than 80 μg/m3 (which equals 40 parts per billion) and 80 μg/m3 over a given period using only the 1 hour values measured between 8:00 and 20:00 Central European Time each day; and

(e) in order to be valid, the annual data on exceedances used to check compliance with the target values and long-term objectives below must meet the criteria set out in Part 2 of Schedule 12.

Target values

Parameter Target value for 2010a
a

Compliance with target values will be assessed as of this value; that is, 2010 will be the first year the data for which is used in calculating compliance over three or five years, as appropriate.
b

The maximum daily 8-hour mean concentration will be selected by examining 8-hour running averages, calculated from hourly data and updated each hour. Each 8-hour average so calculated will be assigned to the day on which it ends; that is, the first calculation period for any one day will be the period from 17:00 on the previous day to 01:00 on that day; the last calculation period for any one day will be the period from 16:00 to 24:00 on the day.
c

If the three or five-year averages cannot be determined on the basis of a full and consecutive set of annual data, the minimum annual data required for checking compliance with the target values will be as follows: (i) for the target value for the protection of human health, valid data for one year, and (ii) for the target value for the protection of vegetation, valid data for three years.
Target value for the protection more of human health Maximum daily 8-hour meanb 120 μg/m3 not to be exceeded on than 25 days per calendar year averaged over three years(3)
Target value for the protection of vegetation AOT 40, calculated from 1-hour values from May to July 18,000 μg/m3.h averaged over five yearsc

Long-term objectives

Parameter Long-term objective
Long-term objective for the protection of human health Maximum daily 8-hour mean within a calendar year 120 μg/m3
Long-term objective for the protection of vegetation AOT40, calculated from 1-hour values from May to July 6,000 μg/m3.h

Page 5 of 15

Previous Next

First page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Last page